Table of Contents for Repair Manual

Product Overview

This comprehensive repair manual provides detailed guidance on the maintenance and repair of machinery components. It is designed for technicians and engineers working on complex systems.

Key Features

• Content
• Introduction
• Engine
• Transmission
• Four Wheel Drive System
• Front Axle
• Rear Axle
• Hydraulic System
• Brakes and Controls
• Frames and Ballasting
• Steering
• Wheels
• Cab Climate Control
• Electrical System
• Front Loader and Bucket
• Platform, Cab, Bodywork and Decals
• Special Tool Index
• Electrical Schematics
• Hydraulic Schematics

Manual Extract: Arm Repair

Pressure Check Instructions

Ensure the pressure is checked under the correct conditions as it is factory preset and not adjustable.

• Ensure the hydraulic oil temperature is between 54 u2013 57 u00b0C (129.2 u2013 134.6 u00b0F). To heat the oil, follow these steps:
• Verify the oil temperature using the cab’s display by navigating to the u201cMachine Service u2013 Sensor Status u2013 Hydraulicsu201d screens.
• Start the engine and run it at full throttle.
• Hold the joystick in the ROLLBACK position while raising and lowering the lift arms from ground level to full height.
• Continue until the oil reaches the desired temperature range.
• Raise lift arms to the top and turn off the engine. Switch the ignition key to the u201cRUNu201d position.
• Repeat the joystick movement to the u201cFLOATu201d position and back to neutral quickly.
• The system should manage at least 10 actuations into float while ensuring the lift arms descend.