Comprehensive Guide to Tractor Systems

Product Overview

This manual provides a detailed table of contents, covering all aspects necessary for understanding and maintaining your tractor systems. It offers valuable instructions for different tractor components, ensuring smooth operation and maintenance.

Table of Contents

• Content
• Introduction
• Engine
• Clutch
• Transmission
• Four Wheel Drive (4WD)
• Front Axle System
• Rear Axle System
• Power Take Off (PTO)
• Brakes and Controls
• Hydraulic Systems
• Hitches, Drawbars, and Implement Couplings
• Frames and Ballasting
• Steering
• Wheels
• Cab Climate Control
• Electrical System
• Platform, Cab, Bodywork, and Decals
• Special Tool Index

Manual Extract: Differential Assembly

Prior to beginning operations, ensure that the differential is assembled by referring to the guide numbered Differential – Assemble (25.102).

n

Assembly Instructions

1. Clean and degrease the mating surfaces, then apply a bead of gasket sealer approximately 2 mm wide along the indicated areas. Note: Installing new seals is recommended to prevent leaks post-assembly.
2. Attach a suitable lifting eye bolt to the pinion shaft and secure it with appropriate lifting equipment.
3. Carefully install the differential into the axle housing, ensuring the two locating dowels are correctly positioned.
4. Secure the differential housing bolts and tighten them to 137 Nm (101 lb ft).
5. Use lifting equipment to reposition the front axle onto the axle stands.

Next Steps

Proceed by installing the axle shafts. For detailed guidance, refer to the section titled Axle shaft – Install (25.108).