Case 350, 400, and 450 Rowtrac Manual

Product Overview

This comprehensive manual provides detailed instructions for the maintenance and installation of key components in the Case 350, 400, and 450 Rowtrac Series. It covers everything from the engine and transmission to the electrical systems and cab climate control, ensuring that users can effectively manage and maintain their equipment.

n

Key Features

• Comprehensive Table of Contents for easy navigation
• Detailed sections on engine, transmission, and hydraulic systems
• Guidelines for brakes and controls, steering, and wheels
• Specific instructions on cab climate control and electrical systems
• Includes information on frames, ballasting, and special tools

Benefits

• Ensures reliable operation of Rowtrac series with accurate installation guidance
• Helps extend the lifespan of equipment through proper maintenance
• Aids in troubleshooting and resolving technical issues effectively

Usage Recommendations

Manual Extract: Parking brake or parking lock installation for 300 and 400 series axles.

• Place the park brake onto the front cover. Secure using mounting bolts and washers; tighten to 234 – 269 Nu00b7m (173 – 198 lb ft).
• If retaining the original yoke and pinion shaft, install the original shims. For replacements, shim as needed to achieve a 0.076 – 0.127 mm (0.003 – 0.005 in) gap between the pinion shaft end and yoke retaining washer. Torque the bolt to 378 – 678 Nu00b7m (279 – 500 lb ft).
• Install the tee and reconnect both lines.
• Pull the drive shaft and pillow block to the rear; install bolts to the yoke using LOCTITEu00ae 242 on threads. Torque to 115 – 129 Nu00b7m (85 – 95 lb ft).
• Install the pillow block with two bolts, washers, and nuts. Torque to 271 – 298 Nu00b7m (200 – 220 lb ft). Ensure the pillow block is mounted in its original frame position with flint washers on top.