Service Manual Table of Contents

Product Overview

The comprehensive service manual provides detailed instructions and troubleshooting steps for maintaining and repairing your equipment. Utilize this manual to ensure optimal performance and longevity of your machinery.

Contents

1. General
2. Engine
3. Fuel System
4. Electrical
5. Steering
6. Power Train
7. Brakes
8. Hydraulics
9. Chassis

Manual Extract: Troubleshooting Shift Delays and Vehicle Stoppage

This section provides guidance for addressing issues such as shift delays and the vehicle stopping unexpectedly during operation, especially when the oil is hot.

Shift Delay in 6-7 and 12-13

• Check the accumulator charge pressures.
• Inspect the master clutch linkage and cable for proper adjustment.
• Verify zero forward and zero reverse cable adjustments.
• Assess and adjust the regulated pressure using the Regulated Pressure Test and Adjustment Procedure.
• Examine the pressure reducing spool for sticking.
• Ensure the flow sensing spool is not sticking and is fully seated.

Tractor Stops When Shifting Gears (Hot Oil)

• Verify and adjust the accumulator pressure setting.
• Check the master clutch linkage for proper adjustment.
• Ensure proper adjustments of zero forward and zero reverse cables.
• Perform the Regulated Pressure Test and Adjustment Procedure to check the pressure setting.
• Inspect and, if necessary, replace the shuttle spool.
• Verify that the pressure reducing spool is functioning properly.
• Ensure the flow sensing spool is not sticking and is correctly seated. Refer to Shift Valve Components.