Comprehensive Guide to Machinery Maintenance

Product Overview

This detailed manual provides step-by-step instructions for the maintenance and repair of your machinery. Ideal for professional technicians and machinery enthusiasts, this guide covers everything from basic hardware to complex systems. Ensure longevity and optimal performance by following these expert guidelines.

Table of Contents

1. Contents
2. Introduction
3. Engine
4. Hydraulic Systems
5. Frames and Ballasting
6. Tracks and Track Suspension
7. Cab Climate Control
8. Electrical Systems
9. Booms, Dippers, and Buckets
10. Platform, Cab, Bodywork, and Decals
11. Special Tool Index
12. Hydraulic Schematics
13. Electrical Schematics

Manual Extract: Glow Plug Removal

• Remove the glow plug connector from the glow plug.
• Detach the glow plug from the cylinder head assembly.

Injection Pipe Removal

• Detach the clip from the inlet pipe.
• Remove the injection pipe from both the injector and the common rail assembly.

NOTE: Do not reuse the removed injection pipe.

NOTICE: Seal the common rail and injector to prevent contamination with foreign materials.

Injection Pipe Components

• No.1 Injection Pipe
• No.2 Injection Pipe
• No.3 Injection Pipe
• No.4 Injection Pipe
• Fuel Leak-off Pipe
• Fuel Pipe

Usage Recommendations

• Ensure all parts are correctly installed to prevent damage.
• Regularly check and maintain components for optimal performance.
• Follow all safety precautions outlined in each section of this manual.