DX31, DX34 Repair Manual

Product Overview

The following is a detailed table of contents extracted from the DX31 and DX34 repair manual. This repair manual includes comprehensive instructions for maintaining and repairing various parts of the machinery, providing essential information for professional technicians and DIY enthusiasts.

Table of Contents

• Section 00 – General Information … Page 2
• Section 10 – Engine … Page 3
• Section 18 – Clutch … Page 10
• Section 21 – Gear Transmission … Page 11
• Section 25 – FWD Axle … Page 14
• Section 27 – Differential, Rear Axle … Page 17
• Section 29 – Hydrostatic Transmission … Page 18
• Section 31 – Power Take-Off Systems … Page 22
• Section 33 – Brakes … Page 24
• Section 35 – Hydraulic System … Page 24
• Section 41 – Steering Systems … Page 27
• Section 44 – Wheels and Tires … Page 29
• Section 55 – Electrical System … Page 30
• Section 90 – Platform … Page 36

This manual compiles the contents from each section and chapter of the DX31, DX34 Repair Manual, complete part number #87535061.

Manual Extract: Timing Gear Cover Removal

The following steps provide a guide to removing the timing gear cover on the DX31 and DX34 models:

n

• Drain the engine crankcase oil.
• Remove the crankshaft pulley.
• Detach the fuel shut-off solenoid from the engine block.
• Loosen the four injection pump mounting bolts, lift the injection pump slightly to remove the spring pin, and disconnect the governor link from the control rack. Remove the injection pump.
• Loosen the hose clamp on the suction hose and remove the return hose from the power steering unit.
• Remove the pressure tube from the bottom of the steering pump.
• Extract the through bolts to detach the steering pump from the front cover, then cap the lines and pump openings.
• Remove the retaining bolts and lift the timing gear cover off the locating dowels.