JXU Series Repair Manual Overview

Product Overview

The JXU Series Repair Manual (Complete Repair Manual # 87020289) is a comprehensive guide designed to facilitate detailed maintenance and repair of the JXU Series tractors. It encompasses a collection of essential content pages distributed among various sections and chapters, catering to different parts and systems of the tractor.

Table of Contents

• General Information
• Engine
• Clutch
• Front Transmission
• 4WD Transfer Box
• MFD Axle
• Rear Transmission
• Power Take-Off
• Brakes
• Hydraulic Systems
• Steering
• Wheel Axles (2WD)
• Electrical Systems
• Platform, Cab, Bodywork and Decals

Manual Extract: Checking the Alignment of the Leading Wheels

n

To ensure optimal driving performance, it is crucial to verify that the leading wheels are correctly aligned. The wheels should be angled at 2u00b0 to the ground, creating a difference of 0.6 inches (15 mm) between the top and bottom edges of the 16-inch rims. Moreover, when the vehicle is driving straight, the wheels must align parallel with the tractor’s longitudinal axis or maintain a toe-in of no more than 0.2 inches (5 mm) at the front.

Toe-In Measurement Procedure

• Inflate the front tires to a pressure of 36.2 psi (2.5 bar).
• Position the steering wheel so that one spoke is aligned with the tractor’s longitudinal axis.
• Ensure the wheels are parallel to the tractor’s longitudinal axis.
• Measure the distance (B) between the front inside edges of the rims on a horizontal plane passing between the wheel centers.
• Measure the distance between the rear inside edges on the same plane. The distance should be equal to or greater than (B) by up to 0.2 inches (5 mm).
• If necessary, adjust the toe-in by manipulating the end of the transverse steering tie-rod.