Massey Ferguson 1205, 1215, 1225 Tractor Workshop Manual

Product Overview

This comprehensive workshop manual is designed for Massey Ferguson Tractors models 1205, 1215, and 1225. It is an essential guide for maintaining and repairing these tractors, providing detailed instructions and illustrations spread over 178 pages.

Model: Tractor 1205, 1215, 1225

Format: PDF

Type: Workshop Manual

Publication No: 1449217M1

Manual Contents

• General Information
• Engine
• Major Components
• Clutch System
• Transmission
• Hydrostatic Transmission
• Rear Axle and Brakes
• Front Axle
• Hydraulic System
• Electrical Accessories
• Steering System
• Lubrication

Key Features

• 178 pages of detailed maintenance and repair instructions.
• Includes diagrams and illustrations for better understanding.
• Covers all major components and systems of the tractor.

Benefits

• Helps in efficiently maintaining and troubleshooting your tractor.
• Saves time and expenses by enabling self-service.
• Ensures longevity and optimal performance of your equipment.

Usage Recommendations

• Use for routine maintenance and complicated repairs.
• Ideal for both professional mechanics and tractor owners.
• Keep this manual readily accessible for reference during repairs.

Separation of the Engine from Clutch Housing

Follow these steps to separate the engine from the clutch housing:

1. Drain the transmission oil.
2. Remove the hood and additional components.
3. Detach the bolt of the 4WD shaft-cover and remove it from the pivot metal.
4. Disconnect the wiring connectors situated at the right bottom of the steering wheel column.
5. Detach the throttle wire and disconnect the fuel pipe from the fuel filter. Note: Plug the pipe to prevent fuel spills.
6. Remove the fuel filter along with the stay, and disconnect the delivery and suction pipes from the gear pump.
7. Uninstall the fuel tank with its bracket.
8. Remove all bolts except one which secures the engine to clutch housing. Important: Leave one bolt for safety to prevent premature separation.
9. Place wooden blocks between the front axle and its bracket to hold the engine securely.
10. Support the transmission case with a floor jack and lift the engine using a chain block, then remove the last bolt.
11. Carefully separate the engine from the clutch housing.

Removal of Engine

Steps to remove the engine:

1. Ensure the engine is separated from the clutch housing.
2. Disconnect bolts for the grounding at the right side of the front axle bracket.
3. Drain the engine coolant and disconnect the coolant drain hose.
4. Detach the water pipes.
5. Remove bolts fastening the engine and front axle bracket. Note: Pre-support the engine with a chain block for safety.
6. Detach the front axle bracket.