Massey Ferguson 630, 650, 660, 680 Tractor Workshop Manual

Product Overview

This comprehensive workshop manual provides detailed guidance and specifications for the Massey Ferguson 630, 650, 660, and 680 tractors. Available in PDF format and in English, this extensive manual spans 703 pages, ensuring that both professional mechanics and tractor enthusiasts have the information needed for maintenance and repair.

Model: Massey Ferguson Tractor 630, 650, 660, 680

Manual Table of Contents

• A: Introduction
• B: Splitting the Tractor
• C: Reserved
• D1: Carraro 4WD Front Axle – Models: Ca 20.18, 20.21, 20.29
• D2: ZF 4WD Front Axle – Models: APL 345, 350, 359
  • Note: Includes primary drive box details for MF 630 and 650 tractors covered in Section G3.
• E: Perkins Engines
• F: Clutches
• G1: Constant Mesh Type 12×4 Gearbox
• G2: Eaton Synchromesh 12×4 Gearbox
• G3: 12×5 Gearbox – ZF T3500
• H: Rear Axle
• I1: Ferguson Hydraulic Lift System
• I2: Hydrotronic Hydraulic Lift System
• I3: Boschtronic Hydraulic Lift System
• J: Power Take-off – Live and Independent
• L: Electrical System
• M: Auxiliary Hydraulic System
• N: Cab, Air Conditioning System and Heating
• O: Tractorsu2019 General Basic Specifications

Manual Extract

n
Reassembly and Adjustment of Secondary Driving Box:

• Reverse the disassembly procedure while observing the following steps.
• Install a new retainer on the cover and apply Loctite sealant.
• Install the needle roller bearing using the specified tool (FT0081).
• Insert the axle into the designated lodging.
• Install the lock-ring with its ends facing up and place the bearing on the axle.
• Install the rear cover, apply sealing adhesive on the surface, and tighten with a torque of 8.5 kgf.m to the fastening bolts.

Usage Recommendations

• Refer to the relevant section for specific maintenance tasks.
• Utilize the proper tools and techniques as advised for efficient repairs.
• Follow the manual’s detailed instructions to ensure the tractor’s optimal performance.