Mitsubishi FB13PNT, FB15PNT, FB16PNT, FB16CPNT Lift Truck Manual

Product Overview

The Mitsubishi Lift Truck models FB13PNT, FB15PNT, FB16PNT, and FB16CPNT are supported by this comprehensive service manual, published under code 99759-5M200. Available in English and formatted as a PDF, it serves as a detailed guide for the maintenance and operation of these forklift models.

Included within the manual are:

• Service Manual: 294 Pages
• Controller Manual: 292 Pages

Forklift Manual Table of Contents:

• General Information
• Front Axle & Reduction Differential
• Transfer Assembly
• Rear Axle
• Brake System
• Steering System
• Hydraulic System
• Mast and Forks
• Service Data
• Panel Cabin

This service manual provides detailed instructions on all mechanical components and systems exclusive of the electrical system, which is addressed in the separate Controller manual. Descriptions, illustrations, and specifications cater to the forklifts’ serial numbers available at the time of printing.

Key Features

• Comprehensive coverage of major forklift systems
• In-depth service and maintenance instructions
• Detailed illustrations to support understanding

Benefits

• Ensures optimal forklift performance through guided maintenance
• Enhances understanding of mechanical components and systems
• Facilitates accurate troubleshooting and repairs

Usage Recommendations

• Refer to the specific sections corresponding to the maintenance need
• Follow all safety guidelines provided within the manual
• Use the manual in conjunction with the Controller manual for electrical systems

For detailed brake system maintenance, adhere strictly to the following instructions:

• /a>
• Lay the transfer assembly on its side for installation, noting right and left differences.
• Use a pin and O-ring to hold the brake lever, and secure with a clevis pin and split pin.
• Loosen the nut and adjust the brake lever by hand to bring brake plates into contact; tighten the adjusting bolt to the case by hand.
• If dimension 2) is 8mm (0.32in.) or less, replace friction plates.
• Loosen the adjusting bolt by one turn and hand-tighten the nut to secure.
• Follow specified tightening torque: 6.9 u00b1 1.4 Nu00b7m (0.7 u00b1 0.14 kgfu00b7m) [5.09 u00b1 1.03 lbfu00b7ft].