AGCO GT45, GT55, GT65, GT75 Tractor Manual

Product Overview

This comprehensive manual is specifically designed for the AGCO GT series tractors, including models GT45, GT55, GT65, and GT75. Available in PDF format, this manual provides extensive guidance and technical details over 363 pages. The manual’s identification number is 79021715, and it is provided in English.

Table of Contents

• General Information
• Engine
• Transmission
• Drive Axles
• Brakes
• Hydraulics
• Controls
• Body
• System
• Electrical System

Key Features

• In-depth technical guidance for multiple AGCO GT tractor models
• Extensive coverage including mechanical and electrical systems
• Detailed instructions and technical drawings

Benefits

• Facilitates comprehensive maintenance and troubleshooting
• Enhances the understanding of tractor components and operations
• Valuable resource for both professional mechanics and tractor owners

Usage Recommendations

• Ideal for use when performing regular maintenance and repairs
• Consult the manual for detailed procedures and safety tips
• Keep the manual accessible for quick reference during servicing

Manual Extract: Cleaning Crankshaft and Cylinder Block Internal Passages

After completing all crankshaft and cylinder block overhauling operations, it’s crucial to clean the lubricating oil passages. This can be effectively performed using Diesel fuel or by blasting compressed air into the passages.

Checking Crankshaft End Play:

Utilize a magnetic base comparator for this inspection:

• Attach the magnetic base and comparator onto the crankcase, ensuring the comparator feeler contacts one end of the crankshaft.
• Use a lever to move the crankshaft axially toward the comparator side until the comparator hand ceases to move.
• Reset the comparator, then push the crankshaft towards the opposite direction and note the end play reading from the comparator dial.

The ideal reading should be between 0.004-0.010u201d (0.10 to 0.27 mm). If the reading exceeds this range, fit spacing half-rings sized 0.004-0.008u201d (0.10 to 0.20 mm) over the nominal thickness. These half-rings are commonly available as spare parts.