Steering Valve Disassembly Manual

Product Overview

This comprehensive guide provides detailed instructions for the disassembly of a steering valve, crucial for maintenance and repair procedures. Whether you’re a professional mechanic or a DIY enthusiast, this manual will guide you through each step of the process.

Table of Contents

• Engine
• Power Train
• Steering System
• Brake and Air System
• Work Equipment System
• Electric and Electronic System
• Others

Manual Extract: Disassembly of Steering Valve

n

This section describes the steps for the disassembly of a steering valve, ensuring you can efficiently and safely perform this task.

Disassembly Steps

• Remove Tubes: Detach tubes (1) and (2) from the assembly.
• Main and Safety Valve Removal: Extract the main relief valve assembly (3) and safety valve assembly (4).
• Case Assembly:
  • Remove case assembly (5) and collar (6).
  • Detach covers (26) and (27).
  • Remove the dust seal (28).
  • Loosen bolt (30) of lever (29) and extract shaft (31).
  • Take out the oil seal (32) along with bearings (33) and (34).
• Spool Assembly:
  • Detach case (7) and remove spool assembly (8).
  • Unscrew bolt (9), then remove retainer (10), spring (11) from spool (12). Make sure to do this while the spool is assembled in the body.
• Valve and Plate Removal:
  • Remove plate (13) to extract valve (14), then remove seat (15), spring (16), and valve (17).
• Assembly Component Removal:
  • Extract valve (18), followed by boss (19), spring (20), washer (21), and spool (22).
  • Remove plate (13), then extract seat (23), spring (24), and poppet (25).

Usage Recommendations

• Ensure you have all necessary tools and safety equipment before beginning the disassembly process.
• Follow each step carefully to avoid damage to components.
• Refer to the manual regularly to verify each step of the process.
• Dispose of any oils or fluids responsibly to comply with environmental regulations.