Kubota M100X, M110X, M126X, M135X Tractor Workshop Manual

Product Overview

The Kubota Tractor models M100X, M110X, M126X, and M135X are comprehensive equipment solutions, each detailed in this workshop manual. This comprehensive guide, published under code 9Y111-02690, is available in PDF format and written in English. Covering 690 pages for the Workshop Manual and 178 pages for the Operators Manual, it provides essential servicing and maintenance instructions.

Additionally, two supplementary manuals are included to provide detailed insights into the M126DTPC and M135X-S tractors.

Table of Contents of the Workshop Service Manual

This extensive Workshop Manual guides service personnel through the operational mechanism, maintenance protocols, and servicing requirements of the M100X, M110X, M126X, and M135X models. It is divided into four segments: “Information”, “General”, “Mechanism”, and “Servicing”.

Information

• Safety First
• Safety Label
• Specification
• Dimension

General

• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools

Mechanism

This section provides a detailed explanation of the structure and function of the unit. Prior to proceeding with subsequent sections, it is recommended to read this part thoroughly. Refer to the latest version of the Workshop Manual (Codes 9Y021-01870 / 9Y021-18200) for comprehensive details on the diesel engine and tractor mechanism not covered here.

Servicing M100X, M110X, M126X, M135X

• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling, and Servicing

Benefits and Recommendations

• Ensure easy disassembly and reassembly by organizing parts in a clean area, maintaining the correct placement of screws, bolts, and nuts.
• When special tools are necessary, use specified KUBOTA tools or reference the drawings to manufacture tools not frequently required.
• Prior to disassembly or repair, disconnect the ground cable from the battery to ensure safety.
• Clean oil and dirt from parts before measurement for accurate servicing.
• Use KUBOTA genuine parts exclusively to maintain performance and ensure safety.
• Replace gaskets and O-rings with new ones during reassembly, applying grease to new O-rings and oil seals.
• Ensure the correct orientation of snap rings and spring pins in accordance with prescribed methods to prevent undue force and damage.
• Use only specified fluid or its equivalent to safeguard the hydraulic system.