Takeuchi TB014 and TB016 Compact Excavator Service Manual

Product Overview

Discover the comprehensive guide to the Takeuchi TB014 and TB016 Compact Excavators. This service manual is an invaluable resource for operation, repair, and maintenance instructions. Designed to assist maintenance personnel, the manual provides detailed guidance on disassembly and reassembly processes, maintenance checks, troubleshooting procedures, and specifications.

Key Features

• Model: Excavator TB014 and TB016
• Format: PDF
• Language: English
• Service Manual Pages: 577
• Operating Manual Pages: 214
• Parts Manual Pages: 437

Benefits

• Enhance maintenance techniques with detailed procedural guides.
• Access comprehensive safety instructions to ensure proper operation.
• Utilize troubleshooting insights for efficient problem-solving.
• Facilitate effective communication and ownership transfer by keeping the manual accessible.

Usage Recommendations

• Always keep the manual available, preferably attached to the machine.
• Ensure prescribed inspections are performed before operation.
• In case of any irregularities, repair immediately to avoid operational hazards.
• Hand over the manual if transferring machine ownership.

Additional Information

This manual may not exactly match the specifications of your machine, as diagrams and content are subject to updates reflecting design changes.

Table of Contents

1. General Information
2. Specifications
3. Machine Configuration
4. Hydraulic Units
5. Troubleshooting
6. Engine Details

Extract from the Service Manual

Inspection After Disassembly

After cleaning parts with oil, perform the following checks:

Piston Rod:

• Replace if cracks are found.
• Repair or replace if threads are damaged.
• Replace if the plating is broken, rusted, or scratched.
• Replace if bent over 1 mm per meter.
• Replace if it squeaks or catches during testing.
• Replace bushing if the inner diameter is worn.

Tube:

• Replace if the welded portion has cracks.
• Replace if the internal surface is scratched or leaking.
• Replace bushing if the inner diameter is worn.

Rod Cover:

• Replace bushing if the clearance with the piston rod exceeds 0.25 mm.
• Replace if scratches are deeper than acceptable limits.